Guest Midnight Express83 Posted February 26, 2003 Report Posted February 26, 2003 How can I transfer from my PC to my VCR. I am trying to make comp tapes off of my DL matches. Any help is much needed.
Guest Eagan469 Posted February 26, 2003 Report Posted February 26, 2003 if you have a TV/S-Video out on your video card, you can use a cable (find one at Radio Shack) to connect your computer to your TV and record the picture using your VCR easy, no?
Guest Midnight Express83 Posted February 26, 2003 Report Posted February 26, 2003 I don't have the TV/S video ports on my PC.
Guest razazteca Posted February 27, 2003 Report Posted February 27, 2003 picture quality can't be too good on the transfer can it? Unless it was a DVD rip.
Guest Lethargic Posted February 27, 2003 Report Posted February 27, 2003 I burn everything onto CD-RWs and watch them on my DVD player and tape them to VHS. I have the S-video output too but I've never used it. I've thought about getting a S-Video to RCA adapter so I can just put my extra VCR right next to the PC and record stuff right off there. But I've always heard that those outputs have copyblock on there to keep you from doing that.
Guest Dace59 Posted February 27, 2003 Report Posted February 27, 2003 V-CD/ CDRWs (With all Plug ins) seems the way to go. Signal to noise must be pretty big between PC and Video. And if the quality wasn't too good to begin with....
Guest El Gigante Posted February 27, 2003 Report Posted February 27, 2003 I have my VCR hooked up to my PC through my TV card, but I can't seem to figure out how to record back from the computer to the VCR. But, I was reading online that you need some sort of scan converter to record to a VCR from PC. Any truth to this either?
Guest Midnight Express83 Posted February 28, 2003 Report Posted February 28, 2003 I can't do the VCD thing since most aren't in mpeg. Alot of are in .asf. I want to just send it back to my VCR, or should I wait until I buy my new PC with a DVD-RW?
Guest Lethargic Posted February 28, 2003 Report Posted February 28, 2003 Nothing I put on CD is originally mpeg. It's always avi. You just have to covert it.
Guest Midnight Express83 Posted March 1, 2003 Report Posted March 1, 2003 how do I do this, I have Roxio Easy CD creator 5 Plat plus.
Guest Lethargic Posted March 1, 2003 Report Posted March 1, 2003 TMPGEnc How to... http://www.dvdrhelp.com/tmpgenc.htm
Guest BifEverchad Posted March 1, 2003 Report Posted March 1, 2003 I burn everything onto CD-RWs and watch them on my DVD player and tape them to VHS. I've been FOREVER trying to find out an easy way to do this.. Can anyone help?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now